TIMKEN 94700-94113-B tapered bearings with Flange
Also known as : 94700-94113-B
- Inside Diameter: 177.8 mm
- Outside Diameter: 288.925 mm
- Width: 26.988 mm
- Basic dynamic load rating: 660 kN
- Basic static load rating: 1070 kN
TIMKEN 94700-94113-B Bearing
TIMKEN 94700-94113-B Bearing details
Series | 94000 |
---|---|
model | 94700-94113-B |
Cone Part Number | 94700 |
Cup Part Number | 94113-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
16.00 Kg 35.30 lb |
Dimensions | |
d - Bore |
177.800 mm 7.0000 in |
D - Cup Outer Diameter |
288.925 mm 11.3750 in |
D1 - Flange Outer Diameter |
299.933 mm 11.8084 in |
B - Cone Width |
63.5 mm 2.5 in |
C - Cup Width |
47.625 mm 1.8750 in |
C1 - Cup Flange Width |
11.113 mm 0.4375 in |
T - Bearing Width to Flange |
26.988 mm 1.0625 in |
T1 - Bearing Width |
63.500 mm 2.5000 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
7.100 mm 0.280 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
195.10 mm 7.68 in |
db - Cone Backface Backing Diameter |
207 mm 8.15 in |
Da - Cup Frontface Backing Diameter |
272.03 mm 10.75 in |
Ab - Cage-Cone Frontface Clearance |
6.3 mm 0.25 in |
Aa - Cage-Cone Backface Clearance |
6.1 mm 0.24 in |
a - Effective Center Location |
-0.8 mm -0.03 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
171000 N 38500 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
660000 N 148000 lbf |
C0 - Static Radial Rating |
1070000 N 242000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
137000 N 30800 lbf |
Factors | |
K - Factor | 1.25 |
e - ISO Factor | 0.47 |
Y - ISO Factor | 1.28 |
G1 - Heat Generation Factor (Roller-Raceway) | 692 |
G2 - Heat Generation Factor (Rib-Roller End) | 93.8 |
Cg - Geometry Factor | 0.129 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 94700-94113-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.