TIMKEN 99600-99100-B Bearing

TIMKEN 99600-99100-B tapered bearings with Flange

Also known as : 99600-99100-B

  • Inside Diameter: 152.4 mm
  • Outside Diameter: 254 mm
  • Width: 30.163 mm
  • Basic dynamic load rating: 660 kN
  • Basic static load rating: 1030 kN

Inquire Now


TIMKEN 99600-99100-B Bearing

TIMKEN 99600-99100-B Bearing details

Series 99000
model 99600-99100-B
Cone Part Number 99600
Cup Part Number 99100-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 12.900 Kg
28.400 lb
Dimensions
d - Bore 152.400 mm
6.0000 in
D - Cup Outer Diameter 254.000 mm
10.0000 in
D1 - Flange Outer Diameter 264.973 mm
10.4320 in
B - Cone Width 66.675 mm
2.6250 in
C - Cup Width 47.625 mm
1.8750 in
C1 - Cup Flange Width 11.113 mm
0.4375 in
T - Bearing Width to Flange 30.163 mm
1.1875 in
T1 - Bearing Width 66.675 mm
2.6250 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 7.100 mm
0.280 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 169.7 mm
6.68 in
db - Cone Backface Backing Diameter 181.1 mm
7.13 in
Da - Cup Frontface Backing Diameter 238.30 mm
9.38 in
Ab - Cage-Cone Frontface Clearance 4.8 mm
0.19 in
Aa - Cage-Cone Backface Clearance 8.6 mm
0.34 in
a - Effective Center Location -12.2 mm
-0.48 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 171000 N
38500 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 660000 N
148000 lbf
C0 - Static Radial Rating 1030000 N
231000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 119000 N
26800 lbf
Factors
K - Factor 1.43
e - ISO Factor 0.41
Y - ISO Factor 1.47
G1 - Heat Generation Factor (Roller-Raceway) 556
G2 - Heat Generation Factor (Rib-Roller End) 66.7
Cg - Geometry Factor 0.146

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 99600-99100-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.