TIMKEN EE231400-232000-B tapered bearings with Flange
Also known as : EE231400-232000-B
- Inside Diameter: 355.6 mm
- Outside Diameter: 508 mm
- Width: 38.1 mm
- Basic dynamic load rating: 1050 kN
- Basic static load rating: 1870 kN
TIMKEN EE231400-232000-B Bearing
TIMKEN EE231400-232000-B Bearing details
Series | 230000 |
---|---|
model | EE231400-232000-B |
Cone Part Number | EE231400 |
Cup Part Number | 232000-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
42.10 Kg 92.80 lb |
Dimensions | |
d - Bore |
355.6 mm 14 in |
D - Cup Outer Diameter |
508.000 mm 20.0000 in |
D1 - Flange Outer Diameter |
522.188 mm 20.5586 in |
B - Cone Width |
66.675 mm 2.6250 in |
C - Cup Width |
50.800 mm 2.0000 in |
C1 - Cup Flange Width |
14.288 mm 0.5625 in |
T - Bearing Width to Flange |
38.100 mm 1.5000 in |
T1 - Bearing Width |
74.615 mm 2.9376 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
6.400 mm 0.25 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
379 mm 14.92 in |
db - Cone Backface Backing Diameter |
388.10 mm 15.28 in |
Da - Cup Frontface Backing Diameter |
492.00 mm 19.37 in |
Ab - Cage-Cone Frontface Clearance |
7.6 mm 0.3 in |
Aa - Cage-Cone Backface Clearance |
18 mm 0.71 in |
a - Effective Center Location |
19.6 mm 0.77 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
273000 N 61300 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
1050000 N 236000 lbf |
C0 - Static Radial Rating |
1870000 N 420000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
206000 N 46200 lbf |
Factors | |
K - Factor | 1.33 |
e - ISO Factor | 0.44 |
Y - ISO Factor | 1.36 |
G1 - Heat Generation Factor (Roller-Raceway) | 2390 |
G2 - Heat Generation Factor (Rib-Roller End) | 366 |
Cg - Geometry Factor | 0.187 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN EE231400-232000-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.