TIMKEN EE231462-232000-B Bearing

TIMKEN EE231462-232000-B tapered bearings with Flange

Also known as : EE231462-232000-B

• Inside Diameter: 371.475 mm
• Outside Diameter: 508 mm
• Width: 38.1 mm
• Basic dynamic load rating: 1050 kN
• Basic static load rating: 1870 kN

Inquire Now

TIMKEN EE231462-232000-B Bearing

Series	230000
model	EE231462-232000-B
Cone Part Number	EE231462
Cup Part Number	232000-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	37.400 Kg 82.40 lb
Dimensions
d - Bore	371.475 mm 14.6250 in
D - Cup Outer Diameter	508.000 mm 20.0000 in
D1 - Flange Outer Diameter	522.188 mm 20.5586 in
B - Cone Width	66.675 mm 2.6250 in
C - Cup Width	50.800 mm 2.0000 in
C1 - Cup Flange Width	14.288 mm 0.5625 in
T - Bearing Width to Flange	38.100 mm 1.5000 in
T1 - Bearing Width	74.613 mm 2.9375 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	6.400 mm 0.25 in
r - Cup Backface "To Clear" Radius	3.30 mm 0.130 in
da - Cone Frontface Backing Diameter	389.90 mm 15.35 in
db - Cone Backface Backing Diameter	400.10 mm 15.75 in
Da - Cup Frontface Backing Diameter	492.00 mm 19.37 in
Ab - Cage-Cone Frontface Clearance	7.6 mm 0.3 in
Aa - Cage-Cone Backface Clearance	18 mm 0.71 in
a - Effective Center Location	19.6 mm 0.77 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	273000 N 61300 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	1050000 N 236000 lbf
C0 - Static Radial Rating	1870000 N 420000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	206000 N 46200 lbf
Factors
K - Factor	1.33
e - ISO Factor	0.44
Y - ISO Factor	1.36
G1 - Heat Generation Factor (Roller-Raceway)	2390
G2 - Heat Generation Factor (Rib-Roller End)	366
Cg - Geometry Factor	0.187

As TIMKEN bearing distributor, Nodes bearings have TIMKEN EE231462-232000-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.