TIMKEN EE243196-243250-B tapered bearings with Flange
Also known as : EE243196-243250-B
- Inside Diameter: 498.475 mm
- Outside Diameter: 634.873 mm
- Width: 31.75 mm
- Basic dynamic load rating: 1470 kN
- Basic static load rating: 3660 kN
TIMKEN EE243196-243250-B Bearing
TIMKEN EE243196-243250-B Bearing details
Series | 243000 |
---|---|
model | EE243196-243250-B |
Cone Part Number | EE243196 |
Cup Part Number | 243250-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
59.900 Kg 132.10 lb |
Dimensions | |
d - Bore |
498.475 mm 19.6250 in |
D - Cup Outer Diameter |
634.873 mm 24.9950 in |
D1 - Flange Outer Diameter |
649.199 mm 25.5590 in |
B - Cone Width |
80.963 mm 3.1875 in |
C - Cup Width |
63.500 mm 2.5000 in |
C1 - Cup Flange Width |
14.288 mm 0.5625 in |
T - Bearing Width to Flange |
31.750 mm 1.2500 in |
T1 - Bearing Width |
80.963 mm 3.1875 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
6.400 mm 0.25 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
522 mm 20.55 in |
db - Cone Backface Backing Diameter |
528.10 mm 20.79 in |
Da - Cup Frontface Backing Diameter |
618.20 mm 24.34 in |
Ab - Cage-Cone Frontface Clearance |
4.3 mm 0.17 in |
Aa - Cage-Cone Backface Clearance |
6.9 mm 0.27 in |
a - Effective Center Location |
19.1 mm 0.75 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
380000 N 85500 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
1470000 N 330000 lbf |
C0 - Static Radial Rating |
3660000 N 822000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
223000 N 50200 lbf |
Factors | |
K - Factor | 1.7 |
e - ISO Factor | 0.34 |
Y - ISO Factor | 1.75 |
G1 - Heat Generation Factor (Roller-Raceway) | 6060 |
G2 - Heat Generation Factor (Rib-Roller End) | 726 |
Cg - Geometry Factor | 0.235 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN EE243196-243250-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.