TIMKEN EE526130-526190-B Bearing

TIMKEN EE526130-526190-B tapered bearings with Flange

Also known as : EE526130-526190-B

  • Inside Diameter: 330.2 mm
  • Outside Diameter: 482.6 mm
  • Width: 41.275 mm
  • Basic dynamic load rating: 1250 kN
  • Basic static load rating: 2320 kN

Inquire Now


TIMKEN EE526130-526190-B Bearing

TIMKEN EE526130-526190-B Bearing details

Series 526000
model EE526130-526190-B
Cone Part Number EE526130
Cup Part Number 526190-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 46.600 Kg
102.80 lb
Dimensions
d - Bore 330.200 mm
13.0000 in
D - Cup Outer Diameter 482.600 mm
19.0000 in
D1 - Flange Outer Diameter 498.373 mm
19.6210 in
B - Cone Width 80.167 mm
3.1562 in
C - Cup Width 60.325 mm
2.3750 in
C1 - Cup Flange Width 15.875 mm
0.6250 in
T - Bearing Width to Flange 41.275 mm
1.6250 in
T1 - Bearing Width 85.725 mm
3.3750 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 6.400 mm
0.25 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 351 mm
13.82 in
db - Cone Backface Backing Diameter 359.90 mm
14.17 in
Da - Cup Frontface Backing Diameter 465.07 mm
18.31 in
Ab - Cage-Cone Frontface Clearance 4.6 mm
0.18 in
Aa - Cage-Cone Backface Clearance 13.5 mm
0.53 in
a - Effective Center Location 4.8 mm
0.19 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 324000 N
72900 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 1250000 N
281000 lbf
C0 - Static Radial Rating 2320000 N
523000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 217000 N
48700 lbf
Factors
K - Factor 1.49
e - ISO Factor 0.39
Y - ISO Factor 1.54
G1 - Heat Generation Factor (Roller-Raceway) 2280
G2 - Heat Generation Factor (Rib-Roller End) 287
Cg - Geometry Factor 0.179

As TIMKEN bearing distributor, Nodes bearings have TIMKEN EE526130-526190-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.