TIMKEN HH221434-HH221410-B Bearing

TIMKEN HH221434-HH221410-B tapered bearings with Flange

Also known as : HH221434-HH221410-B

• Inside Diameter: 88.9 mm
• Outside Diameter: 190.5 mm
• Width: 22.225 mm
• Basic dynamic load rating: 534 kN
• Basic static load rating: 692 kN

Inquire Now

TIMKEN HH221434-HH221410-B Bearing

Series	HH221400
model	HH221434-HH221410-B
Cone Part Number	HH221434
Cup Part Number	HH221410-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	8 Kg 17.700 lb
Dimensions
d - Bore	88.900 mm 3.5000 in
D - Cup Outer Diameter	190.5 mm 7.5 in
D1 - Flange Outer Diameter	199.923 mm 7.8710 in
B - Cone Width	57.531 mm 2.2650 in
C - Cup Width	46.038 mm 1.8125 in
C1 - Cup Flange Width	11.113 mm 0.4375 in
T - Bearing Width to Flange	22.225 mm 0.8750 in
T1 - Bearing Width	57.150 mm 2.2500 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	7.900 mm 0.310 in
r - Cup Backface "To Clear" Radius	3.30 mm 0.130 in
da - Cone Frontface Backing Diameter	104.90 mm 4.13 in
db - Cone Backface Backing Diameter	119.90 mm 4.72 in
Da - Cup Frontface Backing Diameter	179.32 mm 7.06 in
Ab - Cage-Cone Frontface Clearance	4.1 mm 0.16 in
Aa - Cage-Cone Backface Clearance	2 mm 0.08 in
a - Effective Center Location	-15 mm -0.59 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	138000 N 31100 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	534000 N 120000 lbf
C0 - Static Radial Rating	692000 N 156000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	79300 N 17800 lbf
Factors
K - Factor	1.74
e - ISO Factor	0.33
Y - ISO Factor	1.79
G1 - Heat Generation Factor (Roller-Raceway)	266
G2 - Heat Generation Factor (Rib-Roller End)	28.4
Cg - Geometry Factor	0.107

As TIMKEN bearing distributor, Nodes bearings have TIMKEN HH221434-HH221410-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.