TIMKEN HH221447-HH221410-B tapered bearings with Flange
Also known as : HH221447-HH221410-B
- Inside Diameter: 99.982 mm
- Outside Diameter: 190.5 mm
- Width: 22.225 mm
- Basic dynamic load rating: 534 kN
- Basic static load rating: 692 kN
TIMKEN HH221447-HH221410-B Bearing
TIMKEN HH221447-HH221410-B Bearing details
Series | HH221400 |
---|---|
model | HH221447-HH221410-B |
Cone Part Number | HH221447 |
Cup Part Number | HH221410-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
7.300 Kg 16.10 lb |
Dimensions | |
d - Bore |
99.982 mm 3.9363 in |
D - Cup Outer Diameter |
190.5 mm 7.5 in |
D1 - Flange Outer Diameter |
199.923 mm 7.8710 in |
B - Cone Width |
57.531 mm 2.2650 in |
C - Cup Width |
46.038 mm 1.8125 in |
C1 - Cup Flange Width |
11.113 mm 0.4375 in |
T - Bearing Width to Flange |
22.225 mm 0.8750 in |
T1 - Bearing Width |
57.150 mm 2.2500 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
6.400 mm 0.25 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
114 mm 4.49 in |
db - Cone Backface Backing Diameter |
126 mm 4.96 in |
Da - Cup Frontface Backing Diameter |
179.32 mm 7.06 in |
Ab - Cage-Cone Frontface Clearance |
4.1 mm 0.16 in |
Aa - Cage-Cone Backface Clearance |
2 mm 0.08 in |
a - Effective Center Location |
-15 mm -0.59 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
138000 N 31100 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
534000 N 120000 lbf |
C0 - Static Radial Rating |
692000 N 156000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
79300 N 17800 lbf |
Factors | |
K - Factor | 1.74 |
e - ISO Factor | 0.33 |
Y - ISO Factor | 1.79 |
G1 - Heat Generation Factor (Roller-Raceway) | 266 |
G2 - Heat Generation Factor (Rib-Roller End) | 28.4 |
Cg - Geometry Factor | 0.107 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN HH221447-HH221410-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.