TIMKEN HM807046-HM807010-B Bearing

TIMKEN HM807046-HM807010-B tapered bearings with Flange

Also known as : HM807046-HM807010-B

  • Inside Diameter: 50.8 mm
  • Outside Diameter: 104.775 mm
  • Width: 15.875 mm
  • Basic dynamic load rating: 203 kN
  • Basic static load rating: 223 kN

Inquire Now


TIMKEN HM807046-HM807010-B Bearing

TIMKEN HM807046-HM807010-B Bearing details

Series HM807000
model HM807046-HM807010-B
Cone Part Number HM807046
Cup Part Number HM807010-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 1.600 Kg
3.50 lb
Dimensions
d - Bore 50.8 mm
2 in
D - Cup Outer Diameter 104.775 mm
4.1250 in
D1 - Flange Outer Diameter 114.300 mm
4.5 in
B - Cone Width 36.513 mm
1.4375 in
C - Cup Width 28.575 mm
1.1250 in
C1 - Cup Flange Width 7.938 mm
0.3125 in
T - Bearing Width to Flange 15.875 mm
0.6250 in
T1 - Bearing Width 36.513 mm
1.4375 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 3.600 mm
0.14 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 63 mm
2.48 in
db - Cone Backface Backing Diameter 70.1 mm
2.76 in
Da - Cup Frontface Backing Diameter 103.12 mm
4.09 in
Ab - Cage-Cone Frontface Clearance 2.5 mm
0.1 in
Aa - Cage-Cone Backface Clearance 3 mm
0.12 in
a - Effective Center Location -7.4 mm
-0.29 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 52700 N
11900 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 203000 N
45700 lbf
C0 - Static Radial Rating 223000 N
50200 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 44000 N
9890 lbf
Factors
K - Factor 1.2
e - ISO Factor 0.49
Y - ISO Factor 1.23
G1 - Heat Generation Factor (Roller-Raceway) 63.9
G2 - Heat Generation Factor (Rib-Roller End) 17.1
Cg - Geometry Factor 0.0760

As TIMKEN bearing distributor, Nodes bearings have TIMKEN HM807046-HM807010-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.