TIMKEN L305648-L305610-B tapered bearings with Flange
Also known as : L305648-L305610-B
- Inside Diameter: 49.987 mm
- Outside Diameter: 80.963 mm
- Width: 7.145 mm
- Basic dynamic load rating: 60.8 kN
- Basic static load rating: 88.8 kN
TIMKEN L305648-L305610-B Bearing
TIMKEN L305648-L305610-B Bearing details
Series | L305600 |
---|---|
model | L305648-L305610-B |
Cone Part Number | L305648 |
Cup Part Number | L305610-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
0.400 Kg 0.80 lb |
Dimensions | |
d - Bore |
49.987 mm 1.9680 in |
D - Cup Outer Diameter |
80.963 mm 3.1875 in |
D1 - Flange Outer Diameter |
84.036 mm 3.3085 in |
B - Cone Width |
18.258 mm 0.7188 in |
C - Cup Width |
14.288 mm 0.5625 in |
C1 - Cup Flange Width |
3.175 mm 0.1250 in |
T - Bearing Width to Flange |
7.145 mm 0.2813 in |
T1 - Bearing Width |
18.258 mm 0.7188 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
1.5 mm 0.06 in |
r - Cup Backface "To Clear" Radius |
1.5 mm 0.06 in |
da - Cone Frontface Backing Diameter |
55.10 mm 2.17 in |
db - Cone Backface Backing Diameter |
56.90 mm 2.24 in |
Da - Cup Frontface Backing Diameter |
78.99 mm 3.11 in |
Ab - Cage-Cone Frontface Clearance |
2.5 mm 0.1 in |
Aa - Cage-Cone Backface Clearance |
0 mm 0 in |
a - Effective Center Location |
-2.5 mm -0.1 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
15800 N 3540 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
60800 N 13700 lbf |
C0 - Static Radial Rating |
88800 N 20000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
9590 N 2160 lbf |
Factors | |
K - Factor | 1.64 |
e - ISO Factor | 0.36 |
Y - ISO Factor | 1.69 |
G1 - Heat Generation Factor (Roller-Raceway) | 38.8 |
G2 - Heat Generation Factor (Rib-Roller End) | 27.8 |
Cg - Geometry Factor | 0.0841 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN L305648-L305610-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.