TIMKEN LL408049-LL408010-B Bearing

TIMKEN LL408049-LL408010-B tapered bearings with Flange

Also known as : LL408049-LL408010-B

  • Inside Diameter: 57.15 mm
  • Outside Diameter: 84.933 mm
  • Width: 5.969 mm
  • Basic dynamic load rating: 36.1 kN
  • Basic static load rating: 46.8 kN

Inquire Now


TIMKEN LL408049-LL408010-B Bearing

TIMKEN LL408049-LL408010-B Bearing details

Series LL408000
model LL408049-LL408010-B
Cone Part Number LL408049
Cup Part Number LL408010-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.200 Kg
0.50 lb
Dimensions
d - Bore 57.150 mm
2.2500 in
D - Cup Outer Diameter 84.933 mm
3.3438 in
D1 - Flange Outer Diameter 87.727 mm
3.4538 in
B - Cone Width 12.700 mm
0.5000 in
C - Cup Width 9.525 mm
0.3750 in
C1 - Cup Flange Width 2.794 mm
0.1100 in
T - Bearing Width to Flange 5.969 mm
0.2350 in
T1 - Bearing Width 12.700 mm
0.5000 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 1.5 mm
0.06 in
r - Cup Backface "To Clear" Radius 1.5 mm
0.06 in
da - Cone Frontface Backing Diameter 61 mm
2.4 in
db - Cone Backface Backing Diameter 64 mm
2.52 in
Da - Cup Frontface Backing Diameter 82.04 mm
3.27 in
Ab - Cage-Cone Frontface Clearance 2.5 mm
0.1 in
Aa - Cage-Cone Backface Clearance 0 mm
0 in
a - Effective Center Location 1.5 mm
0.06 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 9370 N
2110 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 36100 N
8120 lbf
C0 - Static Radial Rating 46800 N
10500 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 5940 N
1340 lbf
Factors
K - Factor 1.58
e - ISO Factor 0.37
Y - ISO Factor 1.62
G1 - Heat Generation Factor (Roller-Raceway) 27.4
G2 - Heat Generation Factor (Rib-Roller End) 36.3
Cg - Geometry Factor 0.0749

As TIMKEN bearing distributor, Nodes bearings have TIMKEN LL408049-LL408010-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.