TIMKEN LM742749-LM742710-B tapered bearings with Flange
Also known as : LM742749-LM742710-B
- Inside Diameter: 215.9 mm
- Outside Diameter: 285.75 mm
- Width: 19.05 mm
- Basic dynamic load rating: 430 kN
- Basic static load rating: 892 kN
TIMKEN LM742749-LM742710-B Bearing
TIMKEN LM742749-LM742710-B Bearing details
Series | LM742700 |
---|---|
model | LM742749-LM742710-B |
Cone Part Number | LM742749 |
Cup Part Number | LM742710-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
7.800 Kg 17.200 lb |
Dimensions | |
d - Bore |
215.900 mm 8.5000 in |
D - Cup Outer Diameter |
285.750 mm 11.2500 in |
D1 - Flange Outer Diameter |
293.685 mm 11.5624 in |
B - Cone Width |
46.038 mm 1.8125 in |
C - Cup Width |
34.925 mm 1.3750 in |
C1 - Cup Flange Width |
7.938 mm 0.3125 in |
T - Bearing Width to Flange |
19.050 mm 0.7500 in |
T1 - Bearing Width |
46.038 mm 1.8125 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
227.1 mm 8.94 in |
db - Cone Backface Backing Diameter |
232.90 mm 9.17 in |
Da - Cup Frontface Backing Diameter |
279.91 mm 11.06 in |
Ab - Cage-Cone Frontface Clearance |
3 mm 0.12 in |
Aa - Cage-Cone Backface Clearance |
4.6 mm 0.18 in |
a - Effective Center Location |
14.2 mm 0.56 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
111000 N 25000 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
430000 N 96600 lbf |
C0 - Static Radial Rating |
892000 N 200000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
91800 N 20600 lbf |
Factors | |
K - Factor | 1.21 |
e - ISO Factor | 0.48 |
Y - ISO Factor | 1.25 |
G1 - Heat Generation Factor (Roller-Raceway) | 867 |
G2 - Heat Generation Factor (Rib-Roller End) | 225 |
Cg - Geometry Factor | 0.139 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN LM742749-LM742710-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.