FAG QJ1030-N2-MPA bearings | Dimensions: 150x225x35mm
Also known as : QJ1030-N2-MPA
- Inside Diameter: 150 mm
- Outside Diameter: 225 mm
- Width: 35 mm
- Basic dynamic load rating: 205 kN
- Basic static load rating: 295 kN
FAG QJ1030-N2-MPA Bearing
FAG QJ1030-N2-MPA Bearing details
| Number | QJ1030-N2-MPA | |
|---|---|---|
| Type |
Four point contact bearings main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots |
|
| d | 150mm | |
| D | 225mm | |
| B | 35mm | |
| 45° | Groove angle | |
| a | 131mm | |
| an | 8,1mm | |
| bn | 6,5mm | |
| D1 | 199,4mm | |
| Da max | 214,8mm | |
| d1 | 176,8mm | |
| da min | 160,2mm | |
| ra max | 2,1mm | |
| rmin | 2,1mm | |
| rn | 1mm | |
| α | 35° | Contact angle |
| m | 6,167kg | Mass |
| Cr | 205000N | Basic dynamic load rating, radial |
| C0r | 295000N | Basic static load rating, radial |
| Cur | 11200N | Fatigue limit load, radial |
| nG | 51001/min | Limiting speed |
| nϑr | 26501/min | Reference speed |
Nodes bearings have FAG QJ1030-N2-MPA bearings in stock, FAG bearings, main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots.
FAG QJ1030-N2-MPA bearing cross reference
FAG 7230-B-XL-MP bearing
150mm x 270mm x 45mm
FAG 7330-B-MP-UA bearing
150mm x 320mm x 65mm
NSK QJ1030 bearing
150mm x 225mm x 35mm
FAG B7030-C-T-P4S bearing
150mm x 225mm x 35mm
FAG B71930-C-T-P4S bearing
150mm x 210mm x 28mm
FAG B7230-C-T-P4S bearing
150mm x 270mm x 45mm
FAG B7030-E-T-P4S bearing
150mm x 225mm x 35mm
FAG B71930-E-T-P4S bearing
150mm x 210mm x 28mm
FAG B7230-E-T-P4S bearing
150mm x 270mm x 45mm
FAG QJ230-N2-MPA bearing
150mm x 270mm x 45mm