FAG QJ211-XL-MPA-C3 bearings | Dimensions: 55x100x21mm
Also known as : QJ211-XL-MPA-C3
- Inside Diameter: 55 mm
- Outside Diameter: 100 mm
- Width: 21 mm
- Basic dynamic load rating: 77 kN
- Basic static load rating: 71 kN
FAG QJ211-XL-MPA-C3 Bearing
FAG QJ211-XL-MPA-C3 Bearing details
| Number | QJ211-XL-MPA-C3 | |
|---|---|---|
| Type |
Four point contact bearings main dimensions to DIN 628-4, separable, with split inner ring |
|
| d | 55mm | |
| D | 100mm | |
| B | 21mm | |
| a | 54mm | |
| D1 | 84,7mm | |
| Da max | 91mm | |
| d1 | 70,4mm | |
| da min | 64mm | |
| ra max | 1,5mm | |
| rmin | 1,5mm | |
| α | 35° | Contact angle |
| m | 0,75kg | Mass |
| Cr | 77000N | Basic dynamic load rating, radial |
| C0r | 71000N | Basic static load rating, radial |
| Cur | 5000N | Fatigue limit load, radial |
| nG | 124001/min | Limiting speed |
| nϑr | 59001/min | Reference speed |
Nodes bearings have FAG QJ211-XL-MPA bearings in stock, FAG bearings, main dimensions to DIN 628-4, separable, with split inner ring.
FAG QJ211-XL-MPA-C3 bearing cross reference
FAG 71811-B-TVH bearing
55mm x 72mm x 9mm
FAG 7211-B-XL-JP bearing
55mm x 100mm x 21mm
FAG 7211-B-XL-MP bearing
55mm x 100mm x 21mm
FAG 7211-B-TVP bearing
55mm x 100mm x 21mm
FAG 7311-B-XL-JP bearing
55mm x 120mm x 29mm
FAG 7311-B-XL-MP bearing
55mm x 120mm x 29mm
FAG 7311-B-TVP-UA bearing
55mm x 120mm x 29mm
FAG 7411-B-XL-MP bearing
55mm x 140mm x 33mm
NSK QJ211 bearing
55mm x 100mm x 21mm
SKF QJ211MA bearing
55mm x 100mm x 21mm
FAG B7011-C-T-P4S bearing
55mm x 90mm x 18mm
