FAG B7011-C-T-P4S spindle bearings | 55x90x18mm
Also known as : B7011-C-T-P4S
- Inside Diameter: 55 mm
- Outside Diameter: 90 mm
- Width: 18 mm
- Basic dynamic load rating: 38.5 kN
- Basic static load rating: 22.1 kN
FAG B7011-C-T-P4S Bearing
FAG B7011-C-T-P4S Bearing details
Number | B7011-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 55 mm | |
D | 90 mm | |
B | 18 mm | |
a | 18,7 mm | |
Da | 83 mm | Tolerance: H12 |
da | 62 mm | Tolerance: h12 |
Etk max | 69,6 mm | |
Etk min | 65,9 mm | |
Etk1 max | 69,6 mm | |
Etk1 min | 65,9 mm | |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,371 kg | ≈ Mass |
Cr | 38500 N | Basic dynamic load rating, radial |
C0r | 22100 N | Basic static load rating, radial |
Cur | 2270 N | Fatigue limit load, radial |
nG Fett | 16000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 24000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 205 N | Preload force |
FV M | 670 N | Preload force |
FV H | 1344 N | Preload force |
KaE L | 635 N | Lift-off force |
KaE M | 2253 N | Lift-off force |
KaE H | 4837 N | Lift-off force |
ca L | 61,4 N/µm | Axial rigidity |
ca M | 106 N/µm | Axial rigidity |
ca H | 151 N/µm | Axial rigidity |
Nodes bearings have FAG B7011-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.