FAG QJ222-N2-MPA bearings | Dimensions: 110x200x38mm
Also known as : QJ222-N2-MPA
- Inside Diameter: 110 mm
- Outside Diameter: 200 mm
- Width: 38 mm
- Basic dynamic load rating: 249 kN
- Basic static load rating: 285 kN
FAG QJ222-N2-MPA Bearing
FAG QJ222-N2-MPA Bearing details
| Number | QJ222-N2-MPA | |
|---|---|---|
| Type |
Four point contact bearings main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots |
|
| d | 110mm | |
| D | 200mm | |
| B | 38mm | |
| 45° | Groove angle | |
| a | 109mm | |
| an | 10,1mm | |
| bn | 8,5mm | |
| D1 | 169,8mm | |
| Da max | 188mm | |
| d1 | 141,7mm | |
| da min | 122mm | |
| ra max | 2,1mm | |
| rmin | 2,1mm | |
| rn | 2mm | |
| α | 35° | Contact angle |
| m | 5,66kg | Mass |
| Cr | 249000N | Basic dynamic load rating, radial |
| C0r | 285000N | Basic static load rating, radial |
| Cur | 12700N | Fatigue limit load, radial |
| nG | 59001/min | Limiting speed |
| nϑr | 33501/min | Reference speed |
Nodes bearings have FAG QJ222-N2-MPA bearings in stock, FAG bearings, main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots.
FAG QJ222-N2-MPA bearing cross reference
FAG 7222-B-XL-JP bearing
110mm x 200mm x 38mm
FAG 7222-B-MP-UO bearing
110mm x 200mm x 38mm
FAG 7222-B-XL-TVP bearing
110mm x 200mm x 38mm
FAG 7322-B-XL-JP bearing
110mm x 240mm x 50mm
FAG 7322-B-MP bearing
110mm x 240mm x 50mm
FAG 7322-B-XL-TVP bearing
110mm x 240mm x 50mm
NSK QJ222 bearing
110mm x 200mm x 38mm
FAG B7022-C-T-P4S bearing
110mm x 170mm x 28mm
FAG B71922-C-T-P4S bearing
110mm x 150mm x 20mm
FAG B7222-C-T-P4S bearing
110mm x 200mm x 38mm
FAG B7022-E-T-P4S bearing
110mm x 170mm x 28mm