FAG B7022-C-T-P4S spindle bearings | 110x170x28mm
Also known as : B7022-C-T-P4S
- Inside Diameter: 110 mm
- Outside Diameter: 170 mm
- Width: 28 mm
- Basic dynamic load rating: 112 kN
- Basic static load rating: 77 kN
FAG B7022-C-T-P4S Bearing
FAG B7022-C-T-P4S Bearing details
Number | B7022-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 110 mm | |
D | 170 mm | |
B | 28 mm | |
a | 32,8 mm | |
Da | 159 mm | Tolerance: H12 |
da | 121 mm | Tolerance: h12 |
Etk max | 135,1 mm | |
Etk min | 128,6 mm | |
Etk1 max | 135,1 mm | |
Etk1 min | 128,6 mm | |
r1 min | 2 mm | |
ra max | 2 mm | |
ra1 max | 1 mm | |
rmin | 2 mm | |
α | 15 ° | Contact angle |
m | 1,95 kg | ≈ Mass |
Cr | 112000 N | Basic dynamic load rating, radial |
C0r | 77000 N | Basic static load rating, radial |
Cur | 6700 N | Fatigue limit load, radial |
nG Fett | 8000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 12000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 643 N | Preload force |
FV M | 2033 N | Preload force |
FV H | 4052 N | Preload force |
KaE L | 1981 N | Lift-off force |
KaE M | 6757 N | Lift-off force |
KaE H | 14370 N | Lift-off force |
ca L | 119 N/µm | Axial rigidity |
ca M | 200 N/µm | Axial rigidity |
ca H | 283 N/µm | Axial rigidity |
Nodes bearings have FAG B7022-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.