FAG single row deep groove ball bearings are the most frequently used type of rolling bearing. They are produced in numerous sizes and designs and are particularly economical.
About sealing
FAG open bearings are suitable for high to very high speeds.
FAG deep groove ball bearings with the suffix 2Z have gap seals on both sides and are suitable for high speeds.
Deep groove ball bearings with the suffix 2RSR have lip seals on both sides made from nitrile butadiene rubber NBR and are suitable for moderate speeds.
By agreement, we can supply bearings with non-contact BRS seals on both sides (suffix 2BRS). These bearings have favourable frictional behaviour equivalent to that of bearings with Z seals . If the inner ring is stationary and the outer ring rotates, the lubricant loss is less than that in bearings with Z seals .
Lubrication
FAG open bearings can be lubricated with grease or oil. FAG deep groove ball bearings with gap or lip seals on both sides are greased with a high quality grease and are lubricated for life.
Anti-corrosion protection
For applications requiring high levels of anti-corrosion protection, we offer corrosion-resistant deep groove ball bearings in sealed and open designs. The range is described in detail in TPI 64, Corrosion-resistant products.
related articles
- Matched FAG single row deep groove ball bearings
- FAG deep groove ball bearing operating temperature
- FAG deep groove ball bearing cage and suffixes
Related numbers
FAG 6205-C-2ZC3 bearing
25mm x 52mm x 15mm
FAG 6000-2RSR bearing
10mm x 26mm x 8mm
FAG 6002-2RSR bearing
15mm x 32mm x 9mm
FAG 6208-2RSR bearing
40mm x 80mm x 18mm
FAG 6309-2RSR bearing
45mm x 100mm x 25mm
FAG 62200-2RSR bearing
10mm x 30mm x 14mm
FAG 62204-2RSR bearing
20mm x 47mm x 18mm
