FAG B7020-C-2RSD-T-P4S spindle bearings | 100x150x24mm
Also known as : B7020-C-2RSD-T-P4S
- Inside Diameter: 100 mm
- Outside Diameter: 150 mm
- Width: 24 mm
- Basic dynamic load rating: 83 kN
- Basic static load rating: 57 kN
FAG B7020-C-2RSD-T-P4S Bearing
FAG B7020-C-2RSD-T-P4S Bearing details
Number | B7020-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 100 mm | |
D | 150 mm | |
B | 24 mm | |
a | 28,7 mm | |
Da | 141 mm | Tolerance: H12 |
da | 110 mm | Tolerance: h12 |
r1 min | 1,5 mm | |
ra max | 1,5 mm | |
ra1 max | 0,6 mm | |
rmin | 1,5 mm | |
α | 15 ° | Contact angle |
m | 1,25 kg | ≈ Mass |
Cr | 83000 N | Basic dynamic load rating, radial |
C0r | 57000 N | Basic static load rating, radial |
Cur | 5300 N | Fatigue limit load, radial |
nG Fett | 9000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 464 N | Preload force |
FV M | 1484 N | Preload force |
FV H | 2970 N | Preload force |
KaE L | 1427 N | Lift-off force |
KaE M | 4935 N | Lift-off force |
KaE H | 10539 N | Lift-off force |
ca L | 104 N/µm | Axial rigidity |
ca M | 175 N/µm | Axial rigidity |
ca H | 248 N/µm | Axial rigidity |
Nodes bearings have FAG B7020-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.