FAG B7220-E-T-P4S spindle bearings | 100x180x34mm
Also known as : B7220-E-T-P4S
- Inside Diameter: 100 mm
- Outside Diameter: 180 mm
- Width: 34 mm
- Basic dynamic load rating: 129 kN
- Basic static load rating: 84 kN
FAG B7220-E-T-P4S Bearing
FAG B7220-E-T-P4S Bearing details
Number | B7220-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 100 mm | |
D | 180 mm | |
B | 34 mm | |
a | 49,6 mm | |
Da | 165,5 mm | Tolerance: H12 |
da | 114,5 mm | Tolerance: h12 |
Etk max | 134,4 mm | |
Etk min | 126,6 mm | |
Etk1 max | 134,4 mm | |
Etk1 min | 126,6 mm | |
r1 min | 2,1 mm | |
ra max | 2,1 mm | |
ra1 max | 1 mm | |
rmin | 2,1 mm | |
α | 25 ° | Contact angle |
m | 3,34 kg | ≈ Mass |
Cr | 129000 N | Basic dynamic load rating, radial |
C0r | 84000 N | Basic static load rating, radial |
Cur | 7300 N | Fatigue limit load, radial |
nG Fett | 6700 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 10000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 1208 N | Preload force |
FV M | 3964 N | Preload force |
FV H | 8152 N | Preload force |
KaE L | 3521 N | Lift-off force |
KaE M | 11940 N | Lift-off force |
KaE H | 25355 N | Lift-off force |
ca L | 285 N/µm | Axial rigidity |
ca M | 449 N/µm | Axial rigidity |
ca H | 604 N/µm | Axial rigidity |
Nodes bearings have FAG B7220-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.