FAG B7021-C-2RSD-T-P4S spindle bearings | 105x160x26mm
Also known as : B7021-C-2RSD-T-P4S
- Inside Diameter: 105 mm
- Outside Diameter: 160 mm
- Width: 26 mm
- Basic dynamic load rating: 85 kN
- Basic static load rating: 61 kN
FAG B7021-C-2RSD-T-P4S Bearing
FAG B7021-C-2RSD-T-P4S Bearing details
Number | B7021-C-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 105 mm | |
D | 160 mm | |
B | 26 mm | |
a | 30,8 mm | |
Da | 150 mm | Tolerance: H12 |
da | 116 mm | Tolerance: h12 |
r1 min | 2 mm | |
ra max | 2 mm | |
ra1 max | 1 mm | |
rmin | 2 mm | |
α | 15 ° | Contact angle |
m | 1,61 kg | ≈ Mass |
Cr | 85000 N | Basic dynamic load rating, radial |
C0r | 61000 N | Basic static load rating, radial |
Cur | 5400 N | Fatigue limit load, radial |
nG Fett | 8500 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 471 N | Preload force |
FV M | 1511 N | Preload force |
FV H | 3027 N | Preload force |
KaE L | 1447 N | Lift-off force |
KaE M | 5010 N | Lift-off force |
KaE H | 10710 N | Lift-off force |
ca L | 107 N/µm | Axial rigidity |
ca M | 181 N/µm | Axial rigidity |
ca H | 257 N/µm | Axial rigidity |
Nodes bearings have FAG B7021-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.