FAG B7209-C-T-P4S spindle bearings | 45x85x19mm
Also known as : B7209-C-T-P4S
- Inside Diameter: 45 mm
- Outside Diameter: 85 mm
- Width: 19 mm
- Basic dynamic load rating: 34 kN
- Basic static load rating: 17.7 kN
FAG B7209-C-T-P4S Bearing
FAG B7209-C-T-P4S Bearing details
Number | B7209-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 45 mm | |
D | 85 mm | |
B | 19 mm | |
a | 18,2 mm | |
Da | 78 mm | Tolerance: H12 |
da | 52,5 mm | Tolerance: h12 |
Etk max | 62,2 mm | |
Etk min | 58,5 mm | |
Etk1 max | 62,2 mm | |
Etk1 min | 58,5 mm | |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,423 kg | ≈ Mass |
Cr | 34000 N | Basic dynamic load rating, radial |
C0r | 17700 N | Basic static load rating, radial |
Cur | 1820 N | Fatigue limit load, radial |
nG Fett | 17000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 28000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 182 N | Preload force |
FV M | 592 N | Preload force |
FV H | 1182 N | Preload force |
KaE L | 567 N | Lift-off force |
KaE M | 2003 N | Lift-off force |
KaE H | 4286 N | Lift-off force |
ca L | 52,2 N/µm | Axial rigidity |
ca M | 90 N/µm | Axial rigidity |
ca H | 129 N/µm | Axial rigidity |
Nodes bearings have FAG B7209-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.