FAG HS7009-C-T-P4S spindle bearings | 45x75x16mm
Also known as : HS7009-C-T-P4S
- Inside Diameter: 45 mm
- Outside Diameter: 75 mm
- Width: 16 mm
- Basic dynamic load rating: 12.3 kN
- Basic static load rating: 7.5 kN
FAG HS7009-C-T-P4S Bearing
FAG HS7009-C-T-P4S Bearing details
Number | HS7009-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances | |
d | 45 mm | |
D | 75 mm | |
B | 16 mm | |
a | 16 mm | |
Da | 69 mm | Tolerance: H12 |
da | 51 mm | Tolerance: h12 |
Etk max | 58,2 mm | |
Etk min | 56,7 mm | |
Etk1 max | 58,2 mm | |
Etk1 min | 54,6 mm | |
r1 min | 1 mm | |
ra max | 1 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 15 ° | Contact angle |
m | 0,262 kg | ≈ Mass |
Cr | 12300 N | Basic dynamic load rating, radial |
C0r | 7500 N | Basic static load rating, radial |
Cur | 770 N | Fatigue limit load, radial |
nG Fett | 26000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 40000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 43 N | Preload force |
FV M | 130 N | Preload force |
FV H | 259 N | Preload force |
KaE L | 130 N | Lift-off force |
KaE M | 409 N | Lift-off force |
KaE H | 853 N | Lift-off force |
ca L | 34,3 N/µm | Axial rigidity |
ca M | 54,1 N/µm | Axial rigidity |
ca H | 74,3 N/µm | Axial rigidity |
Nodes bearings have FAG HS7009-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.