FAG HS7006-C-T-P4S Bearing

FAG HS7006-C-T-P4S spindle bearings | 30x55x13mm

Also known as : HS7006-C-T-P4S

• Inside Diameter: 30 mm
• Outside Diameter: 55 mm
• Width: 13 mm
• Basic dynamic load rating: 8.2 kN
• Basic static load rating: 4.25 kN

Inquire Now

FAG HS7006-C-T-P4S Bearing

Number	HS7006-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	30 mm
D	55 mm
B	13 mm
a	12,2 mm
Da	49 mm	Tolerance: H12
da	36 mm	Tolerance: h12
Etk max	40,9 mm
Etk min	39,7 mm
Etk1 max	40,9 mm
Etk1 min	37,9 mm
r1 min	1 mm
ra max	1 mm
ra1 max	0,3 mm
rmin	1 mm
α	15 °	Contact angle
m	0,124 kg	≈ Mass
Cr	8200 N	Basic dynamic load rating, radial
C0r	4250 N	Basic static load rating, radial
Cur	435 N	Fatigue limit load, radial
nG Fett	38000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	56000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	29 N	Preload force
FV M	88 N	Preload force
FV H	177 N	Preload force
KaE L	89 N	Lift-off force
KaE M	280 N	Lift-off force
KaE H	584 N	Lift-off force
ca L	24,4 N/µm	Axial rigidity
ca M	38,7 N/µm	Axial rigidity
ca H	53,2 N/µm	Axial rigidity

Nodes bearings have FAG HS7006-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.