FAG B71906-C-T-P4S spindle bearings | 30x47x9mm
Also known as : B71906-C-T-P4S
- Inside Diameter: 30 mm
- Outside Diameter: 47 mm
- Width: 9 mm
- Basic dynamic load rating: 8.5 kN
- Basic static load rating: 4.35 kN
FAG B71906-C-T-P4S Bearing
FAG B71906-C-T-P4S Bearing details
Number | B71906-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 30 mm | |
D | 47 mm | |
B | 9 mm | |
a | 9,7 mm | |
Da | 43,5 mm | Tolerance: H12 |
da | 34 mm | Tolerance: h12 |
Etk max | 37 mm | |
Etk min | 36 mm | |
Etk1 max | 37 mm | |
Etk1 min | 36 mm | |
r1 min | 0,3 mm | |
ra max | 0,3 mm | |
ra1 max | 0,15 mm | |
rmin | 0,3 mm | |
α | 15 ° | Contact angle |
m | 0,05 kg | ≈ Mass |
Cr | 8500 N | Basic dynamic load rating, radial |
C0r | 4350 N | Basic static load rating, radial |
Cur | 450 N | Fatigue limit load, radial |
nG Fett | 30000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 48000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 36 N | Preload force |
FV M | 134 N | Preload force |
FV H | 281 N | Preload force |
KaE L | 106 N | Lift-off force |
KaE M | 439 N | Lift-off force |
KaE H | 985 N | Lift-off force |
ca L | 27 N/µm | Axial rigidity |
ca M | 49,3 N/µm | Axial rigidity |
ca H | 72,1 N/µm | Axial rigidity |
Nodes bearings have FAG B71906-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.