FAG HS7007-C-T-P4S Bearing

FAG HS7007-C-T-P4S spindle bearings | 35x62x14mm

Also known as : HS7007-C-T-P4S

• Inside Diameter: 35 mm
• Outside Diameter: 62 mm
• Width: 14 mm
• Basic dynamic load rating: 8.9 kN
• Basic static load rating: 5 kN

Inquire Now

FAG HS7007-C-T-P4S Bearing

Number	HS7007-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	35 mm
D	62 mm
B	14 mm
a	13,5 mm
Da	56 mm	Tolerance: H12
da	41 mm	Tolerance: h12
Etk max	46,8 mm
Etk min	45,7 mm
Etk1 max	46,8 mm
Etk1 min	43,9 mm
r1 min	1 mm
ra max	1 mm
ra1 max	0,3 mm
rmin	1 mm
α	15 °	Contact angle
m	0,169 kg	≈ Mass
Cr	8900 N	Basic dynamic load rating, radial
C0r	5000 N	Basic static load rating, radial
Cur	510 N	Fatigue limit load, radial
nG Fett	34000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	50000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	31 N	Preload force
FV M	93 N	Preload force
FV H	187 N	Preload force
KaE L	94 N	Lift-off force
KaE M	295 N	Lift-off force
KaE H	614 N	Lift-off force
ca L	27,1 N/µm	Axial rigidity
ca M	42,8 N/µm	Axial rigidity
ca H	58,8 N/µm	Axial rigidity

Nodes bearings have FAG HS7007-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.