FAG B7207-C-T-P4S Bearing

FAG B7207-C-T-P4S spindle bearings | 35x72x17mm

Also known as : B7207-C-T-P4S

• Inside Diameter: 35 mm
• Outside Diameter: 72 mm
• Width: 17 mm
• Basic dynamic load rating: 25.5 kN
• Basic static load rating: 12.6 kN

Inquire Now

FAG B7207-C-T-P4S Bearing

Number	B7207-C-T-P4S
Type	FAG spindle bearings, adjusted, in pairs or sets
d	35 mm
D	72 mm
B	17 mm
a	15,7 mm
Da	63 mm	Tolerance: H12
da	44 mm	Tolerance: h12
Etk max	51 mm
Etk min	47,8 mm
Etk1 max	51 mm
Etk1 min	47,8 mm
r1 min	1,1 mm
ra max	1 mm
ra1 max	0,3 mm
rmin	1,1 mm
α	15 °	Contact angle
m	0,301 kg	≈ Mass
Cr	25500 N	Basic dynamic load rating, radial
C0r	12600 N	Basic static load rating, radial
Cur	1300 N	Fatigue limit load, radial
nG Fett	20000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	34000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	134 N	Preload force
FV M	443 N	Preload force
FV H	887 N	Preload force
KaE L	418 N	Lift-off force
KaE M	1500 N	Lift-off force
KaE H	3223 N	Lift-off force
ca L	44,8 N/µm	Axial rigidity
ca M	77,8 N/µm	Axial rigidity
ca H	112 N/µm	Axial rigidity

Nodes bearings have FAG B7207-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.