FAG HS7008-C-T-P4S Bearing

FAG HS7008-C-T-P4S spindle bearings | 40x68x15mm

Also known as : HS7008-C-T-P4S

• Inside Diameter: 40 mm
• Outside Diameter: 68 mm
• Width: 15 mm
• Basic dynamic load rating: 9.4 kN
• Basic static load rating: 5.7 kN

Inquire Now

FAG HS7008-C-T-P4S Bearing

Number	HS7008-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	40 mm
D	68 mm
B	15 mm
a	14,7 mm
Da	62 mm	Tolerance: H12
da	46 mm	Tolerance: h12
Etk max	52,3 mm
Etk min	51,2 mm
Etk1 max	52,3 mm
Etk1 min	49,4 mm
r1 min	1 mm
ra max	1 mm
ra1 max	0,3 mm
rmin	1 mm
α	15 °	Contact angle
m	0,211 kg	≈ Mass
Cr	9400 N	Basic dynamic load rating, radial
C0r	5700 N	Basic static load rating, radial
Cur	590 N	Fatigue limit load, radial
nG Fett	30000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	45000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	34 N	Preload force
FV M	101 N	Preload force
FV H	201 N	Preload force
KaE L	100 N	Lift-off force
KaE M	316 N	Lift-off force
KaE H	659 N	Lift-off force
ca L	30,1 N/µm	Axial rigidity
ca M	47,4 N/µm	Axial rigidity
ca H	64,9 N/µm	Axial rigidity

Nodes bearings have FAG HS7008-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.