FAG B7208-C-T-P4S spindle bearings | 40x80x18mm
Also known as : B7208-C-T-P4S
- Inside Diameter: 40 mm
- Outside Diameter: 80 mm
- Width: 18 mm
- Basic dynamic load rating: 32.5 kN
- Basic static load rating: 16.1 kN
FAG B7208-C-T-P4S Bearing
FAG B7208-C-T-P4S Bearing details
Number | B7208-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 40 mm | |
D | 80 mm | |
B | 18 mm | |
a | 17 mm | |
Da | 72 mm | Tolerance: H12 |
da | 48 mm | Tolerance: h12 |
Etk max | 57,2 mm | |
Etk min | 53,4 mm | |
Etk1 max | 57,2 mm | |
Etk1 min | 53,4 mm | |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,372 kg | ≈ Mass |
Cr | 32500 N | Basic dynamic load rating, radial |
C0r | 16100 N | Basic static load rating, radial |
Cur | 1660 N | Fatigue limit load, radial |
nG Fett | 18000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 30000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 175 N | Preload force |
FV M | 566 N | Preload force |
FV H | 1128 N | Preload force |
KaE L | 544 N | Lift-off force |
KaE M | 1920 N | Lift-off force |
KaE H | 4102 N | Lift-off force |
ca L | 49,2 N/µm | Axial rigidity |
ca M | 84,7 N/µm | Axial rigidity |
ca H | 122 N/µm | Axial rigidity |
Nodes bearings have FAG B7208-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.