FAG HS7015-C-T-P4S spindle bearings | 75x115x20mm
Also known as : HS7015-C-T-P4S
- Inside Diameter: 75 mm
- Outside Diameter: 115 mm
- Width: 20 mm
- Basic dynamic load rating: 25.5 kN
- Basic static load rating: 17.9 kN
FAG HS7015-C-T-P4S Bearing
FAG HS7015-C-T-P4S Bearing details
Number | HS7015-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances | |
d | 75 mm | |
D | 115 mm | |
B | 20 mm | |
a | 22,7 mm | |
Da | 107 mm | Tolerance: H12 |
da | 82 mm | Tolerance: h12 |
Etk max | 92,4 mm | |
Etk min | 90,2 mm | |
Etk1 max | 92,4 mm | |
Etk1 min | 87,3 mm | |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 15 ° | Contact angle |
m | 0,679 kg | ≈ Mass |
Cr | 25500 N | Basic dynamic load rating, radial |
C0r | 17900 N | Basic static load rating, radial |
Cur | 1850 N | Fatigue limit load, radial |
nG Fett | 17000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 26000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 89 N | Preload force |
FV M | 266 N | Preload force |
FV H | 533 N | Preload force |
KaE L | 265 N | Lift-off force |
KaE M | 835 N | Lift-off force |
KaE H | 1737 N | Lift-off force |
ca L | 53,7 N/µm | Axial rigidity |
ca M | 84,3 N/µm | Axial rigidity |
ca H | 115 N/µm | Axial rigidity |
Nodes bearings have FAG HS7015-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.