FAG B71915-C-T-P4S spindle bearings | 75x105x16mm
Also known as : B71915-C-T-P4S
- Inside Diameter: 75 mm
- Outside Diameter: 105 mm
- Width: 16 mm
- Basic dynamic load rating: 35 kN
- Basic static load rating: 24.2 kN
FAG B71915-C-T-P4S Bearing
FAG B71915-C-T-P4S Bearing details
Number | B71915-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 75 mm | |
D | 105 mm | |
B | 16 mm | |
a | 20,1 mm | |
Da | 99,5 mm | Tolerance: H12 |
da | 81 mm | Tolerance: h12 |
Etk max | 87,2 mm | |
Etk min | 84,3 mm | |
Etk1 max | 87,2 mm | |
Etk1 min | 84,3 mm | |
r1 min | 1 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 1 mm | |
α | 15 ° | Contact angle |
m | 0,347 kg | ≈ Mass |
Cr | 35000 N | Basic dynamic load rating, radial |
C0r | 24200 N | Basic static load rating, radial |
Cur | 2490 N | Fatigue limit load, radial |
nG Fett | 13000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 20000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 172 N | Preload force |
FV M | 584 N | Preload force |
FV H | 1189 N | Preload force |
KaE L | 527 N | Lift-off force |
KaE M | 1933 N | Lift-off force |
KaE H | 4206 N | Lift-off force |
ca L | 68 N/µm | Axial rigidity |
ca M | 117 N/µm | Axial rigidity |
ca H | 168 N/µm | Axial rigidity |
Nodes bearings have FAG B71915-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.