FAG HS7016-C-T-P4S Bearing

FAG HS7016-C-T-P4S spindle bearings | 80x125x22mm

Also known as : HS7016-C-T-P4S

• Inside Diameter: 80 mm
• Outside Diameter: 125 mm
• Width: 22 mm
• Basic dynamic load rating: 30.5 kN
• Basic static load rating: 21.8 kN

Inquire Now

FAG HS7016-C-T-P4S Bearing

Number	HS7016-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	80 mm
D	125 mm
B	22 mm
a	24,7 mm
Da	117 mm	Tolerance: H12
da	88 mm	Tolerance: h12
Etk max	99,7 mm
Etk min	97,3 mm
Etk1 max	99,7 mm
Etk1 min	94 mm
r1 min	1,1 mm
ra max	1 mm
ra1 max	0,6 mm
rmin	1,1 mm
α	15 °	Contact angle
m	0,927 kg	≈ Mass
Cr	30500 N	Basic dynamic load rating, radial
C0r	21800 N	Basic static load rating, radial
Cur	2220 N	Fatigue limit load, radial
nG Fett	15000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	24000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	106 N	Preload force
FV M	317 N	Preload force
FV H	633 N	Preload force
KaE L	315 N	Lift-off force
KaE M	991 N	Lift-off force
KaE H	2063 N	Lift-off force
ca L	58,7 N/µm	Axial rigidity
ca M	92 N/µm	Axial rigidity
ca H	126 N/µm	Axial rigidity

Nodes bearings have FAG HS7016-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.