FAG B7216-C-T-P4S spindle bearings | 80x140x26mm
Also known as : B7216-C-T-P4S
- Inside Diameter: 80 mm
- Outside Diameter: 140 mm
- Width: 26 mm
- Basic dynamic load rating: 94 kN
- Basic static load rating: 55 kN
FAG B7216-C-T-P4S Bearing
FAG B7216-C-T-P4S Bearing details
Number | B7216-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 80 mm | |
D | 140 mm | |
B | 26 mm | |
a | 27,7 mm | |
Da | 129 mm | Tolerance: H12 |
da | 91 mm | Tolerance: h12 |
Etk max | 105,3 mm | |
Etk min | 100,5 mm | |
Etk1 max | 105,3 mm | |
Etk1 min | 100,5 mm | |
r1 min | 2 mm | |
ra max | 2 mm | |
ra1 max | 1 mm | |
rmin | 2 mm | |
α | 15 ° | Contact angle |
m | 1,43 kg | ≈ Mass |
Cr | 94000 N | Basic dynamic load rating, radial |
C0r | 55000 N | Basic static load rating, radial |
Cur | 5400 N | Fatigue limit load, radial |
nG Fett | 10000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 17000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 549 N | Preload force |
FV M | 1721 N | Preload force |
FV H | 3412 N | Preload force |
KaE L | 1701 N | Lift-off force |
KaE M | 5781 N | Lift-off force |
KaE H | 12250 N | Lift-off force |
ca L | 94,1 N/µm | Axial rigidity |
ca M | 159 N/µm | Axial rigidity |
ca H | 226 N/µm | Axial rigidity |
Nodes bearings have FAG B7216-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.