FAG HS7022-C-T-P4S spindle bearings | 110x170x28mm
Also known as : HS7022-C-T-P4S
- Inside Diameter: 110 mm
- Outside Diameter: 170 mm
- Width: 28 mm
- Basic dynamic load rating: 48 kN
- Basic static load rating: 38 kN
FAG HS7022-C-T-P4S Bearing
FAG HS7022-C-T-P4S Bearing details
Number | HS7022-C-T-P4S | |
---|---|---|
Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances | |
d | 110 mm | |
D | 170 mm | |
B | 28 mm | |
a | 32,8 mm | |
Da | 159 mm | Tolerance: H12 |
da | 121 mm | Tolerance: h12 |
Etk max | 136,5 mm | |
Etk min | 133,3 mm | |
Etk1 max | 136,5 mm | |
Etk1 min | 129,2 mm | |
r1 min | 2 mm | |
ra max | 2 mm | |
ra1 max | 1 mm | |
rmin | 2 mm | |
α | 15 ° | Contact angle |
m | 2,17 kg | ≈ Mass |
Cr | 48000 N | Basic dynamic load rating, radial |
C0r | 38000 N | Basic static load rating, radial |
Cur | 3300 N | Fatigue limit load, radial |
nG Fett | 12000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 18000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 168 N | Preload force |
FV M | 503 N | Preload force |
FV H | 1005 N | Preload force |
KaE L | 499 N | Lift-off force |
KaE M | 1566 N | Lift-off force |
KaE H | 3257 N | Lift-off force |
ca L | 77,2 N/µm | Axial rigidity |
ca M | 121 N/µm | Axial rigidity |
ca H | 164 N/µm | Axial rigidity |
Nodes bearings have FAG HS7022-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.