FAG HSS7015-E-T-P4S spindle bearings | 75x115x20mm
Also known as : HSS7015-E-T-P4S
- Inside Diameter: 75 mm
- Outside Diameter: 115 mm
- Width: 20 mm
- Basic dynamic load rating: 23.9 kN
- Basic static load rating: 17 kN
FAG HSS7015-E-T-P4S Bearing
FAG HSS7015-E-T-P4S Bearing details
Number | HSS7015-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, lip seals on both sides, non-contact, restricted tolerances | |
d | 75 mm | |
D | 115 mm | |
B | 20 mm | |
a | 32,1 mm | |
Da | 107 mm | Tolerance: H12 |
da | 82 mm | Tolerance: h12 |
r1 min | 1,1 mm | |
ra max | 1 mm | |
ra1 max | 0,6 mm | |
rmin | 1,1 mm | |
α | 25 ° | Contact angle |
m | 0,741 kg | ≈ Mass |
Cr | 23900 N | Basic dynamic load rating, radial |
C0r | 17000 N | Basic static load rating, radial |
Cur | 1740 N | Fatigue limit load, radial |
nG Fett | 15000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 144 N | Preload force |
FV M | 431 N | Preload force |
FV H | 863 N | Preload force |
KaE L | 415 N | Lift-off force |
KaE M | 1268 N | Lift-off force |
KaE H | 2587 N | Lift-off force |
ca L | 135 N/µm | Axial rigidity |
ca M | 200 N/µm | Axial rigidity |
ca H | 261 N/µm | Axial rigidity |
Nodes bearings have FAG HSS7015-E-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.