FAG HSS71905-C-T-P4S Bearing

FAG HSS71905-C-T-P4S spindle bearings | 25x42x9mm

Also known as : HSS71905-C-T-P4S

• Inside Diameter: 25 mm
• Outside Diameter: 42 mm
• Width: 9 mm
• Basic dynamic load rating: 3.9 kN
• Basic static load rating: 2.06 kN

Inquire Now

FAG HSS71905-C-T-P4S Bearing

Number	HSS71905-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
d	25 mm
D	42 mm
B	9 mm
a	9 mm
Da	38,5 mm	Tolerance: H12
da	29 mm	Tolerance: h12
r1 min	0,3 mm
ra max	0,3 mm
ra1 max	0,15 mm
rmin	0,3 mm
α	15 °	Contact angle
m	0,052 kg	≈ Mass
Cr	3900 N	Basic dynamic load rating, radial
C0r	2060 N	Basic static load rating, radial
Cur	212 N	Fatigue limit load, radial
nG Fett	48000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	14 N	Preload force
FV M	43 N	Preload force
FV H	85 N	Preload force
KaE L	43 N	Lift-off force
KaE M	135 N	Lift-off force
KaE H	282 N	Lift-off force
ca L	17 N/µm	Axial rigidity
ca M	26,8 N/µm	Axial rigidity
ca H	36,9 N/µm	Axial rigidity

Nodes bearings have FAG HSS71905-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.