FAG B7005-C-T-P4S Bearing

FAG B7005-C-T-P4S spindle bearings | 25x47x12mm

Also known as : B7005-C-T-P4S

• Inside Diameter: 25 mm
• Outside Diameter: 47 mm
• Width: 12 mm
• Basic dynamic load rating: 13.7 kN
• Basic static load rating: 5.9 kN

Inquire Now

FAG B7005-C-T-P4S Bearing

Number	B7005-C-T-P4S
Type	FAG spindle bearings, adjusted, in pairs or sets
d	25 mm
D	47 mm
B	12 mm
a	10,8 mm
Da	42 mm	Tolerance: H12
da	30 mm	Tolerance: h12
Etk max	34,1 mm
Etk min	32,5 mm
Etk1 max	34,1 mm
Etk1 min	32,5 mm
r1 min	0,6 mm
ra max	0,6 mm
ra1 max	0,3 mm
rmin	0,6 mm
α	15 °	Contact angle
m	0,077 kg	≈ Mass
Cr	13700 N	Basic dynamic load rating, radial
C0r	5900 N	Basic static load rating, radial
Cur	610 N	Fatigue limit load, radial
nG Fett	34000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	50000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	73 N	Preload force
FV M	248 N	Preload force
FV H	502 N	Preload force
KaE L	226 N	Lift-off force
KaE M	831 N	Lift-off force
KaE H	1807 N	Lift-off force
ca L	29,6 N/µm	Axial rigidity
ca M	51,2 N/µm	Axial rigidity
ca H	73,5 N/µm	Axial rigidity

Nodes bearings have FAG B7005-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.