FAG HSS71907-C-T-P4S Bearing

FAG HSS71907-C-T-P4S spindle bearings | 35x55x10mm

Also known as : HSS71907-C-T-P4S

• Inside Diameter: 35 mm
• Outside Diameter: 55 mm
• Width: 10 mm
• Basic dynamic load rating: 6.4 kN
• Basic static load rating: 3.8 kN

Inquire Now

FAG HSS71907-C-T-P4S Bearing

Number	HSS71907-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
d	35 mm
D	55 mm
B	10 mm
a	11 mm
Da	51,5 mm	Tolerance: H12
da	40 mm	Tolerance: h12
r1 min	0,6 mm
ra max	0,6 mm
ra1 max	0,15 mm
rmin	0,6 mm
α	15 °	Contact angle
m	0,091 kg	≈ Mass
Cr	6400 N	Basic dynamic load rating, radial
C0r	3800 N	Basic static load rating, radial
Cur	390 N	Fatigue limit load, radial
nG Fett	36000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	23 N	Preload force
FV M	70 N	Preload force
FV H	140 N	Preload force
KaE L	70 N	Lift-off force
KaE M	220 N	Lift-off force
KaE H	459 N	Lift-off force
ca L	24,5 N/µm	Axial rigidity
ca M	38,6 N/µm	Axial rigidity
ca H	53 N/µm	Axial rigidity

Nodes bearings have FAG HSS71907-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.