The accuracy of IKO cam followers is shown in table blow.
Table: Tolerances
| Dimensions and symbols | Metric CF series | Miniature CFS series | Inch series | ||
|---|---|---|---|---|---|
| Crowned outer ring | Cylindrical outer ring | Crowned outer ring | Cylindrical outer ring | ||
| Outside dia. of outer ring D |
0 -50 |
see Tolerances and allowable values of outer rings (Metric CF series cylindrical outer rings | see Tolerances and allowable values of outer rings (Miniature CFS series) |
0 -50 |
see Tolerances and allowable values of outer rings (Inch series cylindrical outer ring) |
| Stud dia. d1 | h7 | h6 |
+25 0 |
||
| Width of outer ring C |
0 -120 |
0 -120 |
0 -130 |
||
Table: Tolerances and allowable values of outer rings (Metric CF series cylindrical outer rings(Also applicable to the Cam Follower G.))
|
D Nominal outside dia. of outer ring |
Δ Dmp Single plane mean outside dia. deviation |
VDsp Outside dia. variation in a single radial plane (Max.) |
VDmp Mean outside dia. variation (Max.) |
Kea Radial runout of assembled bearing outer ring (Max.) | ||
|---|---|---|---|---|---|---|
| Over | Incl. | High | low | |||
| 6 | 18 | 0 | -8 | 10 | 6 | 15 |
| 18 | 30 | 0 | -9 | 12 | 7 | 15 |
| 30 | 50 | 0 | -11 | 14 | 8 | 20 |
| 50 | 80 | 0 | -13 | 16 | 10 | 25 |
| 80 | 120 | 0 | -15 | 19 | 11 | 35 |
Table: Tolerances and allowable values of outer rings (Miniature CFS series)
|
Δ Dmp Single plane mean outside dia. deviation |
Kea Radial runout of assembled bearing outer ring (Max.) |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Class 0 | Class 6 | Class 5 | Class 4 | Class 0 | Class 6 | Class 5 | Class 4 | ||||
| High | Low | High | Low | High | Low | High | Low | ||||
| 0 | -8 | 0 | -7 | 0 | -5 | 0 | -4 | 15 | 8 | 5 | 4 |
Table: Tolerances and allowable values of outer rings (Inch series cylindrical outer ring)
|
D Nominal outside dia. of outer ring mm |
Δ Dmp Single plane mean outside dia. deviation |
VDsp Outside dia. variation in a single radial plane (Max.) |
VDmp Mean outside dia. variation (Max.) |
Kea Radial runout of assembled bearing outer ring (Max.) |
||
|---|---|---|---|---|---|---|
| Over | Incl. | High | Low | |||
| 6 | 18 | 0 | -25 | 10 | 6 | 15 |
| 18 | 30 | 12 | 7 | 15 | ||
| 30 | 50 | 14 | 8 | 20 | ||
| 50 | 80 | 16 | 10 | 25 | ||
| 80 | 120 | 19 | 11 | 35 | ||
