INA Roller Bearings SL04 with annular slots lubrication

INA cylindrical roller bearings SL04..-PP are supplied greased as standard.

All the greases used are highly suitable, in terms of moisture resistance and high load carrying capacity, for application in rope sheave bearings operating at low to moderate speeds.

If you have any questions on the subject of lubrication, the specialists in our Tribology Department will be pleased to assist you. Please consult the Nodes Bearings service.

Relubrication

Cylindrical roller bearings SL04 can be relubricated via the inner or outer ring. For this purpose, both bearing rings have an integral circumferential lubrication groove and axial lubrication holes.

It is recommended that catalogue bearings lubricated with a grease in accordance with GA08 should be relubricated using the grease Arcanol LOAD150. In the case of bearings with an initial greasing in accordance with GA22, relubrication can be carried out using a lithium soap grease to DIN 51825 KE2K–50 or DIN 51825 KEHC2K–50 and a base oil viscosity at +40 °C of v = 15 mm2/s or v = 22mm2/s.



Related products

Related numbers

INA SL045004-PP bearings
20mm x 42mm x 30mm
INA SL045005-PP bearings
25mm x 47mm x 30mm
INA SL045006-PP bearings
30mm x 55mm x 34mm
INA SL045007-PP bearings
35mm x 62mm x 36mm
INA SL045008-PP bearings
40mm x 68mm x 38mm
INA SL045011-PP bearings
55mm x 90mm x 46mm
INA SL045012-PP bearings
60mm x 95mm x 46mm
INA SL045018-PP bearings
90mm x 140mm x 67mm