INA ball track rollers

INA ball bearing track rollers are self-retaining, single or double row ball bearings with particularly thick-walled outer rings. In addition to high radial forces, these bearings can also support axial forces in both directions.

The outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where they are inclined in relation to the mating track and edge stresses must be avoided.

INA ball bearing track rollers are available with an inner ring, with a stud and with a plastic tyre on the outer ring.

Outside surface profile of the outer ring

Yoke type track rollers with a crowned outside surface and stud type track rollers have a radius of curvature of R = 500 mm.

Yoke type track rollers with a cylindrical outside surface have the suffix X.

Semiconductors

INA yoke type track rollers

INA yoke type track rollers have outer rings with a crowned or cylindrical outside surface, inner rings and ball and cage assemblies with plastic cages. They are similar in construction to deep groove or angular contact ball bearings and are mounted on shafts or studs.

INA yoke type track rollers LR6, LR60 and LR2 are single row units, LR50, LR52 and LR53 are double row units.

INA ball track rollers sealing

Yoke type track rollers with the suffix 2RSR have lip seals on both sides. In some sizes, RS seals are fitted for reasons of space.

Double row yoke type track rollers with the suffix 2Z have sealing shields on both sides, bearings with the suffix 2RS have lip seals on both sides.

related articles

Related numbers

Related products