INA shell needle bearings inch series

Nodes bearings have INA shell needle bearings in stock including SCE, SCH, BCE, BCH, S, SH, CS, CSH. As INA bearings distributor, we have a wide rage of INA bearings and handsome price.

INA shell needle bearings have a very small radial section. They have a drawn cup or outer race or shell with cage guided needle rollers or a full complement of needle rollers.

These characteristics allow for a lower priced bearing arrangement with high load capacit. For full utilization of the load carrying capacity, the thin-walled cups must be rigidly supported. The INA bearings are pressed into the housing bore and normally require no further axial location.

The most economical way to use INA shell bearings is directly on hardened and ground shafts. When it is not practical to harden and grind the shaft, the INA bearings can be combined with inner rings of series SI or PI. The inner rings should be ordered separately by the part numbers shown in INA bearings size chart.

INA shell needle bearings inch series

Standard INA shell bearings are offered in two basic designs to fit the same shaft diameter. The heavy series is designed for applications where the loading conditions are too great for the standard series.

These INA bearings are characterized by a large cross section and incorporate needle rollers with larger diameter.

A complete line of metric cage guided INA shell bearings is also available.

These INA shell bearings consist of thin-walled drawn cups, cages and needle rollers which together form an integral unit. the cage asseblies ensure efficient performance even at high speeds. Long relubrication intervals can be scheduled due to large grease reservoirs.

Cage guided shell bearings are available in open and designs for most application, and with a closed end on the shell for applications where the shaft does not protrude beyond the beaing. The closed end serves as a seal for one side of the bearing and can also take light thrust loads in some applications.