TIMKEN 09075-09196 Bearing

TIMKEN 09075-09196 tapered roller bearings

Also known as : 09075-09196

• Inside Diameter: 18.999 mm
• Outside Diameter: 49.225 mm
• Width: 23.813 mm
• Basic dynamic load rating: 42.8 kN
• Basic static load rating: 40.5 kN

Inquire Now

TIMKEN 09075-09196 Bearing

Series	09000
model	09075-09196
Cone Part Number	09075
Cup Part Number	09196
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.200 Kg 0.50 lb
Dimensions
d - Bore	18.999 mm 0.7480 in
D - Cup Outer Diameter	49.225 mm 1.9380 in
B - Cone Width	22.332 mm 0.8792 in
C - Cup Width	17.463 mm 0.6875 in
T - Bearing Width	23.813 mm 0.9375 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	2.290 mm 0.090 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	23.88 mm 0.94 in
db - Cone Backface Backing Diameter	0 mm 0 in
Da - Cup Frontface Backing Diameter	44.50 mm 1.79 in
Db - Cup Backface Backing Diameter	41.40 mm 1.63 in
Ab - Cage-Cone Frontface Clearance	1.5 mm 0.06 in
Aa - Cage-Cone Backface Clearance	2.5 mm 0.1 in
a - Effective Center Location	-9.90 mm -0.39 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	11100 N 2500 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	42800 N 9630 lbf
C0 - Static Radial Rating	40500 N 9100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	5050 N 1140 lbf
Factors
K - Factor	2.2
e - ISO Factor	0.27
Y - ISO Factor	2.26
G1 - Heat Generation Factor (Roller-Raceway)	8
G2 - Heat Generation Factor (Rib-Roller End)	4
Cg - Geometry Factor	0.0452

TIMKEN 09075-09196 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.