TIMKEN 09075-09201 Bearing

TIMKEN 09075-09201 tapered roller bearings

Also known as : 09075-09201

• Inside Diameter: 18.999 mm
• Outside Diameter: 50.8 mm
• Width: 21.433 mm
• Basic dynamic load rating: 42.8 kN
• Basic static load rating: 40.5 kN

Inquire Now

TIMKEN 09075-09201 Bearing

Series	09000
model	09075-09201
Cone Part Number	09075
Cup Part Number	09201
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.200 Kg 0.50 lb
Dimensions
d - Bore	18.999 mm 0.7480 in
D - Cup Outer Diameter	50.8 mm 2 in
B - Cone Width	22.332 mm 0.8792 in
C - Cup Width	17.463 mm 0.6875 in
T - Bearing Width	21.433 mm 0.8438 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	2.290 mm 0.090 in
r - Cup Backface "To Clear" Radius	0.51 mm 0.020 in
da - Cone Frontface Backing Diameter	23.88 mm 0.94 in
db - Cone Backface Backing Diameter	0 mm 0 in
Da - Cup Frontface Backing Diameter	45.97 mm 1.81 in
Db - Cup Backface Backing Diameter	43.94 mm 1.73 in
Ab - Cage-Cone Frontface Clearance	1.5 mm 0.06 in
Aa - Cage-Cone Backface Clearance	2.5 mm 0.1 in
a - Effective Center Location	-9.90 mm -0.39 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	11100 N 2500 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	42800 N 9630 lbf
C0 - Static Radial Rating	40500 N 9100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	5050 N 1140 lbf
Factors
K - Factor	2.2
e - ISO Factor	0.27
Y - ISO Factor	2.26
G1 - Heat Generation Factor (Roller-Raceway)	8
G2 - Heat Generation Factor (Rib-Roller End)	4
Cg - Geometry Factor	0.0452

TIMKEN 09075-09201 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.