TIMKEN 441-432D Bearing

TIMKEN 441-432D bearings | 35.001x95.25x61.915mm

Also known as : 441-432D

• Inside Diameter: 35.001 mm
• Outside Diameter: 95.25 mm
• Width: 61.915 mm
• Basic dynamic load rating: 221 kN
• Basic static load rating: 57.3 kN

Inquire Now

TIMKEN 441-432D Bearing

TIMKEN Part Number	441-432D
Brand	TIMKEN
Type	Tapered Roller Bearings - TDO (Tapered Double Inner)
Series	435
Cone Part Number	441
Cup Part Number	432D
Design Units	Imperial
Bearing Weight	4.99 lb 2.264 Kg
Cage Type	Stamped Steel
Ab - Cage-Cone Frontface Clearance	0.05 in 1.3 mm
Alternate Part Name	441-432D
d - Bore	1.3780 in 35.001 mm
D - Cup Outer Diameter	3.7500 in 95.250 mm
B - Cone Width	1.1772 in 29.901 mm
C - Double Cup Width	2.0000 in 50.800 mm
T - Bearing Width across Cones	2.4376 in 61.915 mm
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)	7400 lbf 32900 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)	49700 lbf 221000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)	12900 lbf 57300 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)	3600 lbf 16000 N
K - Factor	2.05
e - ISO Factor	0.28
Y1 - ISO Factor	2.37
Y2 - ISO Factor	3.53
G1 - Heat Generation Factor (Roller-Raceway)	42.5
G2 - Heat Generation Factor (Rib-Roller End)	11.3
Cg - Geometry Factor	0.0805
R - Cone Backface "To Clear" Radius	0.14 in 3.600 mm
r - Cup Frontface "To Clear" Radius	0.03 in 0.8 mm
db - Cone Backface Backing Diameter	1.97 in 50 mm
Da - Cup Frontface Backing Diameter	3.46 in 87.12 mm
Aa - Cage-Cone Backface Clearance	0.04 in 1 mm

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 441-432D Tapered Roller Bearings - TDO (Tapered Double Inner) in stock.