TIMKEN 366-362-B tapered bearings with Flange
Also known as : 366-362-B
- Inside Diameter: 50 mm
- Outside Diameter: 90 mm
- Width: 8.887 mm
- Basic dynamic load rating: 102 kN
- Basic static load rating: 95.8 kN
TIMKEN 366-362-B Bearing
TIMKEN 366-362-B Bearing details
Series | 365 |
---|---|
model | 366-362-B |
Cone Part Number | 366 |
Cup Part Number | 362-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
0.600 Kg 1.20 lb |
Dimensions | |
d - Bore |
50.000 mm 1.9685 in |
D - Cup Outer Diameter |
90.000 mm 3.5433 in |
D1 - Flange Outer Diameter |
94.661 mm 3.7268 in |
B - Cone Width |
22.225 mm 0.8750 in |
C - Cup Width |
15.875 mm 0.6250 in |
C1 - Cup Flange Width |
4.763 mm 0.1875 in |
T - Bearing Width to Flange |
8.887 mm 0.3499 in |
T1 - Bearing Width |
20.000 mm 0.7874 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
2.300 mm 0.090 in |
r - Cup Backface "To Clear" Radius |
0.80 mm 0.030 in |
da - Cone Frontface Backing Diameter |
55.10 mm 2.17 in |
db - Cone Backface Backing Diameter |
58.90 mm 2.32 in |
Da - Cup Frontface Backing Diameter |
86.11 mm 3.40 in |
Ab - Cage-Cone Frontface Clearance |
1.8 mm 0.07 in |
Aa - Cage-Cone Backface Clearance |
0 mm 0 in |
a - Effective Center Location |
-4.3 mm -0.17 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
26400 N 5930 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
102000 N 22900 lbf |
C0 - Static Radial Rating |
95800 N 21500 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
14400 N 3250 lbf |
Factors | |
K - Factor | 1.83 |
e - ISO Factor | 0.32 |
Y - ISO Factor | 1.88 |
G1 - Heat Generation Factor (Roller-Raceway) | 33.8 |
G2 - Heat Generation Factor (Rib-Roller End) | 14 |
Cg - Geometry Factor | 0.0773 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 366-362-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.