FAG B7000-E-2RSD-T-P4S spindle bearings | 10x26x8mm
Also known as : B7000-E-2RSD-T-P4S
- Inside Diameter: 10 mm
- Outside Diameter: 26 mm
- Width: 8 mm
- Basic dynamic load rating: 3.95 kN
- Basic static load rating: 1.41 kN
FAG B7000-E-2RSD-T-P4S Bearing
FAG B7000-E-2RSD-T-P4S Bearing details
Number | B7000-E-2RSD-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 10 mm | |
D | 26 mm | |
B | 8 mm | |
a | 8,2 mm | |
Da | 22 mm | Tolerance: H12 |
da | 14 mm | Tolerance: h12 |
r1 min | 0,3 mm | |
ra max | 0,3 mm | |
ra1 max | 0,1 mm | |
rmin | 0,3 mm | |
α | 25 ° | Contact angle |
m | 0,021 kg | ≈ Mass |
Cr | 3950 N | Basic dynamic load rating, radial |
C0r | 1410 N | Basic static load rating, radial |
Cur | 145 N | Fatigue limit load, radial |
nG Fett | 60000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 21 N | Preload force |
FV M | 99 N | Preload force |
FV H | 223 N | Preload force |
KaE L | 61 N | Lift-off force |
KaE M | 298 N | Lift-off force |
KaE H | 698 N | Lift-off force |
ca L | 27,6 N/µm | Axial rigidity |
ca M | 49,2 N/µm | Axial rigidity |
ca H | 69,1 N/µm | Axial rigidity |
Nodes bearings have FAG B7000-E-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.