FAG B7200-E-T-P4S spindle bearings | 10x30x9mm
Also known as : B7200-E-T-P4S
- Inside Diameter: 10 mm
- Outside Diameter: 30 mm
- Width: 9 mm
- Basic dynamic load rating: 6.6 kN
- Basic static load rating: 2.8 kN
FAG B7200-E-T-P4S Bearing
FAG B7200-E-T-P4S Bearing details
Number | B7200-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 10 mm | |
D | 30 mm | |
B | 9 mm | |
a | 9,3 mm | |
Da | 25,5 mm | Tolerance: H12 |
da | 14,5 mm | Tolerance: h12 |
Etk max | 19,2 mm | |
Etk min | 18 mm | |
Etk1 max | 19,2 mm | |
Etk1 min | 18 mm | |
r1 min | 0,6 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 0,6 mm | |
α | 25 ° | Contact angle |
m | 0,032 kg | ≈ Mass |
Cr | 6600 N | Basic dynamic load rating, radial |
C0r | 2800 N | Basic static load rating, radial |
Cur | 295 N | Fatigue limit load, radial |
nG Fett | 50000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 75000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 32 N | Preload force |
FV M | 141 N | Preload force |
FV H | 314 N | Preload force |
KaE L | 94 N | Lift-off force |
KaE M | 429 N | Lift-off force |
KaE H | 995 N | Lift-off force |
ca L | 35,8 N/µm | Axial rigidity |
ca M | 63,2 N/µm | Axial rigidity |
ca H | 88,8 N/µm | Axial rigidity |
Nodes bearings have FAG B7200-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.