FAG B7003-C-T-P4S Bearing

FAG B7003-C-T-P4S spindle bearings | 17x35x10mm

Also known as : B7003-C-T-P4S

  • Inside Diameter: 17 mm
  • Outside Diameter: 35 mm
  • Width: 10 mm
  • Basic dynamic load rating: 8.6 kN
  • Basic static load rating: 3.5 kN

Inquire Now


FAG B7003-C-T-P4S Bearing

FAG B7003-C-T-P4S Bearing details

Number B7003-C-T-P4S  
Type FAG spindle bearings, adjusted, in pairs or sets  
d 17 mm   
D 35 mm   
B 10 mm   
a 8,5 mm   
Da 32 mm  Tolerance: H12
da 21 mm  Tolerance: h12
Etk max 24,5 mm   
Etk min 23,3 mm   
Etk1 max 24,5 mm   
Etk1 min 23,3 mm   
r1 min 0,3 mm   
ra max 0,3 mm   
ra1 max 0,1 mm   
rmin 0,3 mm   
α 15 °  Contact angle
m 0,039 kg  ≈ Mass
Cr 8600 N  Basic dynamic load rating, radial
C0r 3500 N  Basic static load rating, radial
Cur 360 N  Fatigue limit load, radial
nG Fett 45000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
nG Öl 70000 1/min  Limiting speed for minimal quantity oil lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 40 N  Preload force
FV M 142 N  Preload force
FV H 291 N  Preload force
KaE L 124 N  Lift-off force
KaE M 474 N  Lift-off force
KaE H 1042 N  Lift-off force
ca L 21,1 N/µm  Axial rigidity
ca M 37,1 N/µm  Axial rigidity
ca H 53,6 N/µm  Axial rigidity

Nodes bearings have FAG B7003-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.

FAG B7003-C-T-P4S bearing cross reference

FAG spindle bearings

Related Information

Product search