FAG B7203-E-T-P4S spindle bearings | 17x40x12mm
Also known as : B7203-E-T-P4S
- Inside Diameter: 17 mm
- Outside Diameter: 40 mm
- Width: 12 mm
- Basic dynamic load rating: 12.4 kN
- Basic static load rating: 5.6 kN
FAG B7203-E-T-P4S Bearing
FAG B7203-E-T-P4S Bearing details
Number | B7203-E-T-P4S | |
---|---|---|
Type | FAG spindle bearings, adjusted, in pairs or sets | |
d | 17 mm | |
D | 40 mm | |
B | 12 mm | |
a | 12,6 mm | |
Da | 34,5 mm | Tolerance: H12 |
da | 22,5 mm | Tolerance: h12 |
Etk max | 26,7 mm | |
Etk min | 25 mm | |
Etk1 max | 26,7 mm | |
Etk1 min | 25 mm | |
r1 min | 0,6 mm | |
ra max | 0,6 mm | |
ra1 max | 0,3 mm | |
rmin | 0,6 mm | |
α | 25 ° | Contact angle |
m | 0,062 kg | ≈ Mass |
Cr | 12400 N | Basic dynamic load rating, radial |
C0r | 5600 N | Basic static load rating, radial |
Cur | 580 N | Fatigue limit load, radial |
nG Fett | 36000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
nG Öl | 53000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
FV L | 74 N | Preload force |
FV M | 286 N | Preload force |
FV H | 616 N | Preload force |
KaE L | 216 N | Lift-off force |
KaE M | 871 N | Lift-off force |
KaE H | 1954 N | Lift-off force |
ca L | 53,3 N/µm | Axial rigidity |
ca M | 89,9 N/µm | Axial rigidity |
ca H | 125 N/µm | Axial rigidity |
Nodes bearings have FAG B7203-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.